How Do You Attach a Table Base and a Table Top? FAQ’s from the files of East Coast Chair & Barstool

A column attached to an X-style base.

It’s time. You have received all your furniture, unwrapped it all, and made sure that you have everything that you need. Now it is time to tackle the assembly. One of the most daunting tasks can be assembling table tops and table bases. Don’t worry, attaching a table base and a table top is easier than you might think.

The first step, whether you are assembling an indoor or an outdoor table base, is to take the bottom of the base and attach it to the column. To do this, simply place the column on top of the center of the base and screw the bolt in until it is completely tightened. Next, turn your table top upside down on a flat surface. If you have a single base you will then center the spider. The spider is the smaller, usually square, flat part of the base. Once you have the spider centered onto the table, begin screwing in your eight screws until the top is secure. Each base comes with eight screws per spider. To install this you will need a Philips head screw driver or drill bit.

Purchasing a larger table top might require the use of multiple bases or a double base. You will repeat the process but instead of centering the spider, the bases need to be between 6 to 12 inches from the edge of the table top. This process works for table tops on both table height and bar height bases.

A table top placed on the floor with a base centered over the table top ready to be securely screwed in.

If you are assembling an outdoor table top and base, there are a few adjustments you’ll need to make. First off, most spiders for outdoor tops are an x-shape.(insert picture) Once the column is assembled, place the spider onto a table top that has been turned upside down on a flat surface. With our New England collection, the table is attached using an Alan wrench is provided in your shipment.

The table might have pre-drilled holes that your base lines up with and that you can use to attach the base. Some bases may not line up with the holes depending on your top and base combo. If this is the case, you will have been provided self-tapping screws to allow you to create your own holes. Make sure the base and table top are completely secure before use.

These instructions are based upon the furniture produced by East Coast Chair & Barstool. If you have purchased your commercial furniture elsewhere instructions may vary.

If you are still experiencing issues with attaching your bases and table tops purchased from East Coast Chair & Barstool please contact our service department at 800-986-5352 for help.

How Do I Clean My Restaurant Table Tops? FAQs from the Files of East Coast Chair & Barstool

Cleaning table tops

Restaurant furniture is built tough. The wear and tear that commercial furniture has to endure is far greater than the six chairs and table in your dining room. Because of this heavy usage, commercial furniture also comes with a responsibility. These pieces need to be maintained and properly taken care of to last to their full lifespan. We’ve put together this short guide to help restaurant owners learn a little more about cleaning their table tops.

Laminate table tops should be cleaned with warm water and soap (or detergent) mixture each day and dried with a soft cloth. Spills should be wiped up quickly to avoid further harm to the table. A combination of mild cleaner and baking soda can be used to remove stains from the surface with a stiff nylon brush.

Resin table tops should be cleaned daily with warm water and a mild detergent. Because of the texture of the table, resin tops should not be used with tableware that has unglazed bottoms. To remove scratches, use a toothpaste and car buffer or toothbrush to even out your table top.

Wood table tops can be maintained with mild soap and water. Whether it’s reclaimed, urban distressed, or butcher block tables, harsh cleaners and chemicals should not be used on these tops. These chemicals can harm your wood grain and create a gummy film on your table tops.

IsoTop and Werzalit table tops can be used indoors or outdoors and have a very similar cleaning procedure to other table tops. Soap and water can be used to wipe these tops down between uses. If being used on a patio, IsoTops can also be hosed down with other outdoor furniture.

Poly lumber table tops are very easy to maintain with soap and water. To remove leaf stains and other environmental elements, a wet Magic Eraser can work wonders to buff out the stain. These tops can even withstand a gentle pressure wash.

Stainless steel table tops should be cleaned with soap and water and then dried off as soon as possible. These tables should not be exposed to constant moisture, which can ruin the silicone seal around the edges. Taking proper care of these tops can provide multiple years of seasonal use.

Table top maintenance should be an everyday chore for you and your staff. By taking the time to upkeep your restaurant furniture, it can save you time and money in the future.

Save